|
More Aircraft Tools:
Resources:
|
Home > Countersink Cutters
| |
Countersink Cutters
Piloted Aircraft Stop Countersink Cutters (often called micro-stop cutters, or microstop countersinks) are used to make precision countersinks to accept flush-head fasteners and are used throughout the aviation industry.
Omega Technologies cutters are precision ground to exact tolerances to insure concentricity. Cutters may be used in any micro-stop ''cage'' that accepts 1/4 - 28 threaded shank cutters.
Select the pilot diameter that matches the pre-drilled hole, and the body diameter according to the diameter of the fastener head. Metric and other sizes not listed here, can be quoted on request.
 1/2'' x 100 Degree HSS Piloted Aircraft Stop Countersink Cutters. 1/2'' Body Diameter, High Speed Steel, 100 degree, 1/4-28 Thread.
|
 1/4'' x 100 Degree HSS Piloted Aircraft Stop Countersink Cutters. 1/4'' Body Diameter, High Speed Steel, 100 degree, 1/4-28 Thread
|
 3/8'' x 100 Degree HSS Piloted Aircraft Microstop Countersink Cutters. 3/8'' Body Diameter, High Speed Steel, 100 degree, 1/4-28 Thread.
|
 5/16'' x 100 Degree HSS Piloted Aircraft Microstop Countersink Cutters. 5/16'' Body Diameter, High Speed Steel, 100 degree, 1/4-28 Thread.
|
 5/8'' x 100 Degree HSS Piloted Aircraft Microstop Countersink Cutters. 5/8'' Body Diameter, High Speed Steel, 100 degree, 1/4-28 Thread.
|
 7/16'' x 100 Degree HSS Piloted Aircraft Microstop Countersink Cutters. 7/16'' Body Diameter, High Speed Steel, 100 degree, 1/4-28 Thread.
|
|
|
Orders and inquiries can be made by phone, online, fax, or email.
Office Hours:
Mon - Fri 7:30A - 5:00P, PST
Phone:
800.888.4005
818.264.7970
Fax:
818.264.1414
Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
|
|